
PORTABLE X-RAY SYSTEM – LPX 160
FEATURES:
- 5 TO 160KV, 0.1 TO 5MA
- CONSTANT POTENTIAL OUTPUT
- END GROUNDED EXPOSED ANODE
- PORTABLE, REPEATABLE, ACCURATE
- 100% DUTY CYCLE
- UNPARALLELED RESOLUTION IMAGING
- LIQUID OR AIR COOLED MODELS
SPECIFICATIONS
Input Line Requirements:
- Automatically adapts to input line voltage
- 100-130Vac, 50/60Hz, 20 Amperes maximum
- 200-250Vac, 50/60Hz, 10 Amperes maximum
- May also be portable-generator powered
X-Ray Output:
- 5 to 160kV, 0.1 to 5.0mA
- Constant potential, end-grounded anode,
- air or liquid cooled versions available
X-Ray Tube Window:
- Beryllium 0.8mm (Directional), Nickel 0.6mm (Panoramic)
Radiation Coverage:
- 40° directional or 360° panoramic tube available
Radiation Output:
- 14R/min at 50cm filtered with 0.5 inches (12.7mm) aluminum at 160kV, 5mA
Duty Cycle:
- 100% - liquid or air cooled
Effective Focal Spot:
- Standard: 0.060 in. sq. (1.5mm. sq.)
- Panoramic: This tube has a flat target (0 degree) and therefore it is without dimension along the tube axis (other than panoramic tubes with conical targets). The true focal spot on the target can only be estimated by taking two focal spot film exposures in the main beam 90 degrees apart from each other. Due to this no focal spot is inferred.
Ambient Temp:
- 100% duty cycle @ 120°F (49°C)
Storage Temp:
- -30°F to 160°F (-35°C to 71°C)
Anode Cooling:
- Liquid coolant solution closed loop between X-Ray tube anode and cooling unit, or fan-forced air cooling
Liquid Cooling Unit Dimensions:
- 12.7˝ H x 15.5˝ W x 15.7˝ D (322.6mm x 393.7mm x 398.8mm)
Liquid Cooling Unit Weight:
- 54lbs. (15.4kg) approx.